The Water-Drops® are melted in the oven in a heat-resistant container such as a jam jar. After the melting process, the Water-Drops® have a honey-like consistency for approx. 3 minutes. They can now be poured into the prepared stream or lakebed. Since the Water-Drops® are processed hot, you should definitely wear gloves.
A major advantage of the Water-Drops® is that changes can even be made to the water surface itself after hardening. Due to the low melting point of the Water-Drops®, the material can be melted and reworked with a hairdryer. By using a heat gun, the entire Water-Drops® body of water can even be liquefied again. Consequently, this product is ideal for subsequently designing waves or rapids.
However, there are a few important things to keep in mind when using the Water-Drops®.
To ensure that the plasticiser is completely merged with the Water-Drops®, it’s necessary to stir the melted Water-Drops® very well with a metallic object such as a screwdriver or an old spoon. In addition, the Water-Drops® should not be heated in the microwave. Due to the hot processing, they are also only suitable for adult hobbyists.

First of all, the Water-Drops® are melted in the oven and poured into the prepared lakebed.
After the lake has cooled down, you can also apply Waves & Billows to the surface with a putty knife and mould the mixture.
The shore area is then decorated. The Grass Tufts are ideally suited to this. To attach the Grass Tufts, it’s best to use tweezers.