Water-Drops® “easy”

Ref. 60858
MSRP €15.49

150 g, for approx. 160 ml

Notice: Model building item

Details Water-Drops® “easy”

To know every trick in the book! Water-Drops® easy

The simple application "melting & casting" the Water-Drops® have revolutionized the crafting realistic model waters. With the Water-Drops® easy the silting of lakes and rivers is now even easier. The cup consists of a heat-resistant plastic and is at the same time the melting vessel.
Simply remove the cover and the Water-Drops® easy to melt in the oven at 150 ° C.

The molten Water-Drops® easy are then poured into the prepared lake or stream and harden within minutes completely. If you are not equal to the entire amount of the model water use, Then let the Liquid Water-Drops® just cool in the cup and store the art water until the next application in your hobby room a. The Water-Drops® can be as often melted down and reused again. Real handy!

Contents:	150.00 g
Packaging Unit:	1 Piece/Pieces

Video Water-Drops® “easy”

How-to-tip Water-Drops® “easy”

The Water-Drops® be melted easily in the oven in a heat-resistant container (eg. B. jam jar). After melting of the drops, the material remains for approximately 3 minutes in a syrupy consistency. Now it can be poured into the prepared stream or lake bed.

Is this water cured on your model landscape and you want more changes to the water surface - no problem: With a hairdryer you can melt the surface at any time and edit. With a hot air gun you can even liquefy the entire Water-Drops® waters. A commercial hair dryer is ideal to subsequently draw waves or rapids.

VERY IMPORTANT: Stir the Water-Drops^® very well with a metallic object (eg. with a metal spoon or screwdriver). If the material is not bubble-free or not transparent, return the jar or pot in the oven and heat it for a few more minutes.

Scale Filter Filter all contents of this website by the scale you prefer.

Certified quality

Buyer protection
Privacy
Fast delivery
Certified shop
Secure payment
Money-back guarantee

	Laser-Cut Laser-cut models are made from special, high quality, stable, DIN certified and age resistant NOCH laser cardboard. The finely detailed, delicate models are laser engraved, many of them hand-painted and weathered. The models are manufactured from renewable raw materials thus being especially enviroment friendly.
	Hand-painted Hard foam products are coloured by hand applying specially mixed, water-based NOCH acrylic paints in our own paint shop. Thus the three-dimensionality of the structures are better accentuated. NOCH figures and accessories are also painted by hand with love to detail using choice colours.
	micro-motion micro-motion products add life to your model landscape. Here we combine models, drives and a clever electronic, pre-assemled, easy to use. Operation is possible with an analogue switch or, thanks to a multi-protocol decoder, by digital control.
	NOCH System Bridge All bridges marked with this icon can be combined with each other within the same scale. Thus impressive bridge constructions can be created. To combine several bridges you need further products like bridge piers, truss approach bridges or adapter pieces. The product views show which products you need for each bridge combination.
	NOCH Exklusive Online Products All products marked with this icon are only online available.
	3D Printing The 3D printing features an »additive« procedure during which a plastic material is applied in layers, one upon the other, by a printhead. Thus, layer by layer an individual model is created.
	Micro-Sound With sound

	Green available
	Yellow only a few in stock
	Red currently not in stock

Water-Drops® “easy”

Availability

Icons

Details Water-Drops® “easy”

To know every trick in the book! Water-Drops® easy

Video Water-Drops® “easy”

How-to-tip Water-Drops® “easy”