Creating the perfect body of water in just a few steps
The simple application "melting & casting" the Water-Drops® have revolutionized the crafting realistic model waters. With the Water-Drops® easy the silting of lakes and rivers is now even easier
The Water-Drops® are melted in the oven in a heat-resistant container such as a jam jar. After the melting process, the Water-Drops® have a honey-like consistency for approx. 3 minutes. They can now be poured into the prepared stream or lakebed. Since the Water-Drops® are processed hot, you should definitely wear gloves.
A major advantage of the Water-Drops® is that changes can even be made to the water surface itself after hardening. Due to the low melting point of the Water-Drops®, the material can be melted and reworked with a hairdryer. By using a heat gun, the entire Water-Drops® body of water can even be liquefied again.
A major advantage of the Water-Drops® is that changes can even be made to the water surface itself after hardening. Due to the low melting point of the Water-Drops®, the material can be melted and reworked with a hairdryer. By using a heat gun, the entire Water-Drops® body of water can even be liquefied again.
Consequently, this product is ideal for subsequently designing waves or rapids.
However, there are a few important things to keep in mind when using the Water-Drops®.
To ensure that the plasticiser is completely merged with the Water-Drops®, it’s necessary to stir the melted Water-Drops® very well with a metallic object such as a screwdriver or an old spoon. In addition, the Water-Drops® should not be heated in the microwave. Due to the hot processing, they are also only suitable for adult hobbyists.
However, there are a few important things to keep in mind when using the Water-Drops®.
To ensure that the plasticiser is completely merged with the Water-Drops®, it’s necessary to stir the melted Water-Drops® very well with a metallic object such as a screwdriver or an old spoon. In addition, the Water-Drops® should not be heated in the microwave. Due to the hot processing, they are also only suitable for adult hobbyists.
Featured products
Shopping List
Browse More
Other Crafting Tips
slide 6 to 9 of 10
The simple processing of Foliage
In the first step, paint the desired area of the model with NOCH Grass Glue. Now detach a part of the Groundcover Foliage from the backing material and press it into the glue bed. The realistic ground
Realistic Snowflakes - Creating a winter wonderland in just a few steps
In order to create a true-to-life winter landscape, you can electrostatically charge the 1 mm Snowflakes with the Gras-Master or the Grass Puffer Bottle. The Snowflakes stand vertically on the ground
Creating the perfect body of water in just a few steps
When using Artificial Water, the substrate must be flat and watertight. If needed, you can also seal it with NOCH Modelling Compound. To design a true-to-life body of water, the stream or lakebed is f
In Love, Engaged, Married!
Craft stylish wedding invitations. Everything should be perfect on this very special day in a couple’s life – the wedding! Great styling starts with the invitations. And so that you can craft a particularly pretty invitation, Moni and Sara from Feines Handwerk have come up with a great DIY project using NOCH kreativ Mini Figures. Have fun crafting!
