Cork Track Bed, Three-Way Turnout for Märklin ref. 2270
2 pcs., 3 mm (0.12 in.) high
suitable for Märklin® ref. 2270
|Notice: Model building item|
Details Cork Track Bed, Three-Way Turnout for Märklin ref. 2270
New Embedding for Your Tracks!
Following many requests NOCH launch a range of Cork Trackbeds for H0, TT, H0m and N scale this year. In addition for H0 scale the corresponding formed parts for Märklin® K Tracks are available.
The Cork Trackbeds of 50 cm (19.69 in.) length are suitable for »free« routes. These are provided with a mitre cut in the middle, so they can simply be bent to the outside on the edges in order to separate the Trackbed in two strips. Afterwards the separated strips with the sloped edges are glued outwards, against each other, on the layout base.
By doing so the single strips can be easily adapted to straight and curved routes. Every Cork Plate has a sloped edge on the outside. If desired, the edge can be bent to create a realistic slope. The formed parts are ready cut for the Märklin® K Track references stated with each item. Product
· Realistic trackbed height
· Noise-absorbing and easy to place
· Formed Parts available for Märklin® K Tracks
Note: All formed parts are delivered without tracks and turnouts.
|Packaging Unit:||1 Piece/Pieces|
How-to-tip Cork Track Bed, Three-Way Turnout for Märklin ref. 2270
Firstly, the Cork Trackbed is broken apart in the middle. The "backs" of the two resulting strips are then glued together.
The Cork Trackbed can be laid fexibly and follow all possible tracks. The formed cork parts are simply glued to the installation's foundation. They are cut to match Märklin® K tracks.
The NOCH Grass Glue (ref. 61130 and 61131) is suitable for adhering the Cork Trackbeds.
The Track can also be afterwards ballasted realistically with NOCH Track Ballast (eg. brown, ref. 09372) and NOCH Ballast Glue (ref. 61134).